CASE STUDIES Single to Three phase POLYPHAZ Rotary converter

KS Cabinets Wooroloo W.A
                                                                                     IMPORTANT
The output of the converter could be used to operate all loads in any order or sequence with no modification of equipment that may or may not contained microprocessors etc,  as a POLYPHAZ  rotary converter is a linear device & produces a smooth sine wave similar to utility supplied three phase power.

KS Cabinets were faced with a high cost to get three phase power to their Wooroloo location to operate various three phase woodworking equipment, i.e.: Panel saw 4kw, air compressor 4kw, thicknessor 4kw, dust extractor etc.   The POLYPHAZ converter proved to be the most viable option.

               POLYPHAZ R/15/480 rotary converter                                     2hp dust extractor

                                 4kw panel saw

 Perry Engineering Shepperton Victoria Australia

After re-locating from an area serviced by three phase power getting three phase power at this rural location  to operate the 10hp lathe & 5hp milling machine as well as several smaller machine tools came as a shock.

An  R/22/480 rotary converter was used to operate all the machines in any order or sequence to maintain a viable machine tool enterprise .

      
   R22480 rotary converter                                                   7.5kw lathe

Daylesford Machining Shop  Daylesford VIC
Three phase power was out of the question at this location so a R15480 rotary unit was selected to operate this one man machining & mechanical repairs shop,  rotary converter in background mounted on wall.
 

      
                4.0 Kw lathe                                                                        4.0 Kw mill
 

Home       Contact